Microvascular blood flow with heat transfer in a wavy channel having electroosmotic effects

The present paper addresses microvascular blood flow with heat and mass transfer in complex wavy microchannel modulated by electroosmosis. Investigation is carried out with joule heating and chemical reaction effects. Further, viscous dissipation is also considered. Using Debye–Huckel, lubrication theory, and long wavelength approximations, analytical solutions of dimensionless boundary value problems are obtained. The impacts of different parameters are examined for temperature and concentration profile. Furthermore, nature of pressure rise is also investigated to analyze the pumping characteristics. Important results of flow phenomena are explored by means of graphs.     

A Strategy for Rapid Construction of Blood Vessel‐Like Structures with Complex Cell Alignments

A method is developed that can rapidly produce blood vessel‐like structures by bonding cell‐laden electrospinning (ES) films layer by layer using fibrin glue within 90 min. This strategy allows control of cell type, cell orientation, and material composition in separate layers. Furthermore, ES films with thicker fibers (polylactic‐co‐glycolic acid, fiber diameter: ≈3.7 µm) are used as cell‐seeding layers to facilitate the cell in‐growth; those with thinner fibers (polylactic acid, fiber diameter: ≈1.8 µm) are used as outer reinforcing layers to improve the mechanical strength and reduce the liquid leakage of the scaffold. Cells grow, proliferate, and migrate well in the multilayered structure. This design aims at a new type of blood vessel substitute with flexible control of parameters and implementation of functions.     

A layer potential analysis for transmission problems for Brinkman‐type systems in Lipschitz domains in

The aim of this paper is to establish a well‐posedness result for a boundary value problem of transmission‐type for the standard and generalized Brinkman systems in two Lipschitz domains in , the former being bounded, and the latter, its complement in . As a first step, we establish a well‐posedness result for a transmission problem for the standard Brinkman systems on complementary Lipschitz domains in by making use of the Potential theory developed for such a system. As a second step, we prove our desired result (in L²‐based Sobolev spaces) by using a method based on Fredholm operator theory and the well‐posedness result from the previous step.     

Influence of Side‐Chain Composition on Polythiophene Properties and Supramolecular Assembly of Anionic Polythiophene Derivatives

A series of 10 polythiophene derivatives is reported, in which each polymer has a different percentage of carboxylic acid‐bearing repeat units. The properties of these polymers are explored under acidic conditions, where the carboxylic acid moieties remain neutral, and under basic conditions, where the carboxylic acid units become anionic carboxylates. The properties that are examined for both solutions and films include UV–vis absorption spectroscopy, photoluminescence spectroscopy, and red‐edge optical band gaps. All the properties studied are strongly dependent both on protonation state and percentage of carboxylic acid/carboxylate side chains along the polymer backbone. The anionic form of each polythiophene derivative was also used in layer‐by‐layer film deposition with a cationic phosphonium polyelectrolyte. The film growth process was studied by spectroscopic techniques to assess the influence of side‐chain composition on the film growth and optical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

A mixed hp FEM for the approximation of fourth‐order singularly perturbed problems on smooth domains

We consider fourth‐order singularly perturbed problems posed on smooth domains and the approximation of their solution by a mixed Finite Element Method on the so‐called Spectral Boundary Layer Mesh. We show that the method converges uniformly, with respect to the singular perturbation parameter, at an exponential rate when the error is measured in the energy norm. Numerical examples illustrate our theoretical findings.     

Brownian motion with drift on spaces with varying dimension

Many properties of Brownian motion on spaces with varying dimension (BMVD in abbreviation) have been explored in Chen and Lou (2018). In this paper, we study Brownian motion with drift on spaces with varying dimension (BMVD with drift in abbreviation). Such a process can be conveniently defined by a regular Dirichlet form that is not necessarily symmetric. Through the method of Duhamel’s principle, it is established in this paper that the transition density of BMVD with drift has the same type of two-sided Gaussian bounds as that for BMVD (without drift). As a corollary, we derive Green function estimate for BMVD with drift.     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Structure and conductivity of AOT solutions in n-hexadecane-chloroform mixtures

The structure and conductivity of AOT (sodium bis(2-ethylhexyl) sulfosuccinate) solutions (2.5 × 10⁻⁴–2.5 × 10⁻¹ M) in n-hexadecane-chloroform mixture at the chloroform concentration from 50 to 100 vol% were studied. The diffusion ordered spectroscopy NMR study revealed that in the indicated range, the observed hydrodynamic diameter of micelles depends only on the AOT concentration and does not depend on the chloroform content. Molar fractions of free AOT molecules and those aggregated into micelles were calculated using the Lindman's law: at concentrations above 2.5 × 10⁻¹ М, the solutions contain mostly the micelles, whereas at concentrations below 2.5 × 10⁻⁴ M, the solutions contain AOT molecules. The transition region contains both the AOT molecules and the micelles. Conductivity measurements were used to determine free charge carriers in the bulk of solutions and their contributions to conductivity.     

Nitrogen Doping and Carbon Coating Affects Substrate Selectivity of TiO2 Photocatalytic Organic Pollutant Degradation

A series of carbon-coated, nitrogen-doped titanium dioxide photocatalysts was produced and characterized. N-doped TiO₂ powder samples were prepared using a sol-gel method and subsequently used for making doped-TiO₂ thin films on glass substrates. Carbon layers were coated on the films by a thermal decomposition method using catechol. Diffuse reflectance spectra and Mott-Schottky analyses of the samples proved that nitrogen doping and carbon coating can slightly lower the band gap of TiO₂, broaden its absorption to visible light and enhance its n-type character. According to photocatalytic tests against model contaminants, carbon-coated nitrogen-doped TiO₂ films have better performance than simple TiO₂ on the degradation of Rhodamine B dye molecules, but are poorly effective for degrading 4-chlorophenol molecules. Several possible explanations are proposed for this result, supported by scavenging experiments. This reveals the importance of a broad substrate scope when assessing new photocatalytic materials for water treatment, something which is often overlooked in many literature studies.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.